Caleffi DISCALSLIM Orientable Deaerator For 22mm Copper Pipe 551802
Free shipping
£71.10 EXCL. TAX
£85.32 INCL. TAX
Out of stock
Overview
Caleffi DISCALSLIM Orientable Deaerator For 22mm Copper Pipe 551802
- – Continuously discharge air from climate control circuits
- – Allows system to operate in optimal conditions
- – For vertical or horizontal pipes.
- – Specially suited to under-boiler installation
Details
Caleffi DISCALSLIM Orientable Deaerator For 22mm Copper Pipe 551802
The DISCALSLIM® devices can autonomously and continuously discharge the air from climate control circuits, down to the micro-bubble level (slow, continuous degassing). Circulation of fully deaerated water allows the systems to operate in optimal conditions, free from any noise, corrosion, localised overheating or mechanical damage. This particular series of compact degassers is specially suited to under-boiler installation, in the version with either copper pipes (codes 551801 and 551802) or iron pipes (codes 551805 and 551806). The deaerator can be installed with either vertical or horizontal pipes.
Technical Specifications
Materials | |
Body: | PPAG40 |
Float: | PP |
Float guide and stem: | brass EN 12164 CW614N |
Float lever and spring: | stainless steel EN 10270-3 (AISI 302) |
Seals: | EPDM |
Performance | |
Media: | water, non-hazardous glycol solutions |
Max. glycol percentage: | 30% |
Max. operating pressure: | 3 bar |
Max. discharge pressure: | 3 bar |
Working temperature range: | 0÷110°C |
Connections: |
double-cone for Ø 18 mm, Ø 22 mm copper pipe, |
Drain: |
with hygroscopic cap |
Operating Principle
The special internal configuration of DISCALSLIM® reduces pressure drops to a minimum. Its internal profile deviates part of the flow into the deaeration chamber. In the chamber, the water is slowed down and broken up by fins in secondary chambers, creating a turbulent flow. The resulting mini-vortices separate the air bubbles from the flow, collecting them in the bottom of the chamber, where they aggregate to form large bubbles, which rise upwards through discharge ducts located at the side of the float.
Once they reach the top of the valve, the aggregated bubbles push the float downwards, thus opening the vent valve and discharging the accumulated air.
Technopolymer
The deaerator is made from a technical polymer specifically selected for heating and cooling system applications. The main features of the technopolymer are:
– high strain strength while maintaining good ultimate elongation;
– good resistance to crack propagation;
– very low humidity absorption, for consistent mechanical behaviour;
– high resistance to abrasion caused by continuous medium flow;
– Performance maintained over temperature variation;
– Compatibility with glycols and additives used in circuits.
These basic material characteristics, combined with the appropriate shaping of the most highly stressed areas, enable a comparison with the metals typically used in the construction of deaerators.
Additional information
Weight | 0.5 kg |
---|---|
Manufacturers Code | 551802 |
Brand | Altecnic Caleffi Group |
condition | new |
SKU | 440230 |
Reviews
There are no reviews yet.