Tesla Universal Gas Cookerflex Hose Pipe BS669 – Micropoint Fitting – 3ft x 1/2″ – THN630

Details

Tesla 3ft x 1/2″ Micropoint Cooker Hose BS669 – THN630

A range of 1/2″ & 1/2″ nominal size hoses designed to be fitted to the Cookerflex Micropoint Socket (B614).

Must be installed in accordance with BS6172 National Installation Standard.

This hose is manufactured to BS 669 Part 1 : 1989. It is constructed from a pressure-tight flexible tube made from spiral wound steel strip incorporating a rubber thread which is covered with a rubber tube to provide a hygienic wipe-clean surface.
The hose is terminated at one end with a ½” BSP Taper (EN 10226 R1/2) male fitting, and at the other with a bayonet fitting designed to make a swivel joint when mated to the appropriate cooker socket. This hose has been in use in the UK for over 50 years and remains the first choice for the connection of appliances to natural gas. The rubber thread and cover used on this hose is not impermeable to LPG and therefore it must not be used on LPG installations.

Hose Length – 3 feet

Size – 1/2″

Material – Rubber

Ambient Temperature – 70°C, Touch: 95°C

Bs Eu Standards – BS 669-1:1989

Kitemark Approval

Micropoint connection

All Tesla gas cooker hoses and sockets carry BSI Kitemark™ approval which means that BSI test and approve the products to the relevant standards and also carry out a programme of ongoing surveillance.