Tesla 1000mm x 1/2″ Cooker Hose Straight Bayonet Stainless Steel EN14800 – THUS1000

Details

Tesla 1000mm x 1/2″ Cooker Hose Straight Bayonet Stainless Steel EN14800 – THUS1000

Manufactured using a stainless steel hose construction and approved by BSI to EN 14800. Suitable for 1st, 2nd and 3rd family gases.

1/2” nominal size hose designed to be fitted to the 1/2” Angle Bayonet Socket (B553).

Must be installed in accordance with BS6172 National Installation Standard.

The LPG gas cooker hose is manufactured and approved to the European standard EN 14800. This is constructed using a convoluted stainless steel tube protected with a stainless steel braid and PVC outer cover. It uses the same designs of bayonet fitting as the BS 669 part 1 hoses and can therefore be used with the same sockets. BS6172 installation standard allows the use of this hose construction as it is suitable for LPG installations but please note there is a temperature limitation of 60°C in use.

Firesafe – Patented End Fittings: All Tesla LPG cooker hoses incorporate our “Firesafe” feature, which means that one of the components of the bayonet end fitting is designed to soften and deform in the event of a kitchen fire allowing the valve in the socket to close and prevent further release of gas to fuel the fire.

Hose Length – 1000mm

Size – 1/2″

Material – stainless steel

Bs Eu Standards – BS 669-1:1989

Kitemark Approval

Straight Bayonet connection

All Tesla gas cooker hoses and sockets carry BSI Kitemark™ approval which means that BSI test and approve the products to the relevant standards and also carry out a programme of ongoing surveillance.